TRANFOVIA(NINGBO) EQUIPMENT TECHNOLOGY CO.,LTD
How to Choose the Right Horizontal Winding Machine: Complete Buying Guide
How to choose a horizontal winding machine for transformer coils: size by load, torque and winding diameter, plus key questions to ask the manufacturer.
How to Choose a CRGO Slitting Line: Coil Weight, Width & Burr Acceptance Guide
How to choose a CRGO slitting line: match coil width & weight (2T-10T classes), strip width range, burr ≤0.02 mm acceptance and tension control.
Silicon Steel Slitting Line: Working Principle, Burr Control & Specifications
Silicon steel slitting line explained: working principle, burr control to ≤0.02 mm, CRGO specs (0.15-0.5 mm, 120 m/min) and how to specify a line.
Portable Busbar Machine for On-Site Work: 165 kg, 220 V, Full Cut-Punch-Bend
Portable busbar machine guide: 165 kg, single-phase 220V, shearing + punching + flat bending up to 150×10 mm copper — specs, limits & buying checks.
3-in-1 Busbar Machine: Punching, Shearing, Bending Explained
How a 3-in-1 busbar machine combines punching, shearing & bending in one station: working principle, key specs (350 kN, 12×160 mm) and who it suits.
Servo CNC Busbar Bending Machine: NC.40ZB-1200 vs 2000 — How to Choose
Both NC.40ZB models carry the same 400 kN. What actually differs is reach — and whether a dedicated servo CNC bender is the right machine for your mix at all.
CNC Busbar Punching and Shearing Machine: 400 kN vs 600 kN — How to Choose
A CNC busbar punching and shearing machine sets the pace of switchgear production. Here is how the 400 kN MX402K and 600 kN MX602K actually differ — and how to choose by busbar size, not by price.
CNC Insulation Parts Processing Center for End Rings & Clamps: What to Check Before You Buy
Compare CNC insulation parts processing centers for transformer end rings, platens & clamps: specs, accuracy, dust control & buying checklist.
Strip Shaping Machine: 10-20 Strips per Pass, +20% Material Yield
Strip shaping machine for transformer spacers: 10-20 strips per pass, +20% material yield, multi-strip vs single-strip selection, and key specs.
