Single T Type Pressboard Strip Shaping Machine

Product Introduction

The TRANFOVIA Single T Type Pressboard Strip Shaping Machine is designed for transformer factories and insulation-component workshops that need to process one pressboard strip at a time into different functional profiles. The adjustable cutter shaft and plate-thickness setting allow the machine to be prepared for T-type, dovetail, pigeon-tail and rectangular oil-gap strips without positioning the page as a high-output multi-strip production system.

Equipment Application

This machine is used to shape pre-cut transformer insulation pressboard strips for winding cooling ducts, oil passages and related insulation assemblies. It is most suitable when the production mix includes several strip profiles or wider finished strips, and when the manufacturer needs a flexible single-strip machine that can also serve as a cooling-duct cutter. The machine processes 3-15 mm thick strips, supports finished widths from 10 to 100 mm and requires a minimum processing length of 1000 mm.

Main Features

1 Multiple profile capability. The tooling arrangement supports T-type, dovetail, pigeon-tail and rectangular strip profiles for different transformer insulation structures.

2 Adjustable cutter shaft. The cutter shaft can be adjusted for the approved strip profile and is enclosed by a safety and dust-proof cover.

3 Plate-thickness adjustment. The machine setting can be matched to insulation pressboard from 3 to 15 mm thick.

4 Stable strip feeding. Front and rear active shafts feed the strip through the shaping area; an optional semi-automatic feeding system can be specified.

5 4-15 m/min processing speed. The stated speed range supports both setup work and continuous processing of approved strip profiles.

6 Cooling and dust collection. The cooling and dust-removal system, together with the bag-type dust collector, helps reduce airborne dust and support cutting-tool life.

Technical Parameters

Single-Strip vs. Multiple-Strip Shaping Machine

Choose the Single T Type Pressboard Strip Shaping Machine when the required profiles include T-type, dovetail, pigeon-tail or rectangular strips, when finished width can reach 100 mm, or when one flexible machine must handle several strip designs.

Choose the Multiple Strips Shaping Machine instead when the main objective is batch production of narrow cooling-duct strips, simultaneous output and material utilization.

FAQ

1. What profiles can the machine process?

It is designed for T-type, dovetail, pigeon-tail and rectangular oil-gap or cooling-duct strips, subject to the approved tooling design.

2. Does “single” mean the machine only makes one profile?

No. It refers to single-strip processing. The same machine can be configured for several strip profiles through the appropriate cutter setup.

3. What pressboard thickness and width can be processed?

The stated thickness range is 3-15 mm and the finished strip width range is 10-100 mm.

4. What is the minimum processing length?

The listed minimum processing length is 1000 mm.

5. How is this machine different from the multiple-strip version?

This machine prioritizes profile flexibility and wider individual strips. The multiple-strip machine prioritizes simultaneous slitting and shaping of up to 22 strips.