TRANFOVIA(NINGBO) EQUIPMENT TECHNOLOGY CO.,LTD
TRANFOVIA(NINGBO) EQUIPMENT TECHNOLOGY CO.,LTD
The TRANFOVIA Double Heads Busbar Bending Machine is a dedicated hydraulic machine for forming both ends of a busbar. Each end can be double-bent in one forming sequence, reducing repeated turning or repositioning of the copper bar between operations.This machine is positioned for repeated end-forming jobs.
The Double Heads Busbar Bending Machine is used in busbar production where the same part requires forming at both ends and the main objective is to reduce handling between end-bending steps. It is suitable for repetitive busbar end-forming work in transformer, bus duct and power-distribution component manufacturing when the required section falls within the listed 3 × 30 to 6 × 260 mm range.
The machine has working units at both ends so the busbar can be processed without repeatedly moving it between separate bending stations.
Each end is designed for double bending, reducing the number of handling steps for repeated parts.
The main units use hydraulic working mode for high pressing force and stable operation.
The hydraulic cylinder and high-flow gear pump support faster machine movement during repeated production.
The long, narrow machine arrangement is suited to end-forming of busbars rather than general multi-station punching or CNC angle programming.
| Parameter | Specification |
| Nominal pressure | 600 kN |
| Processing range | 3 × 30 to 6 × 260 mm |
| Total power | 5.5 kW |
| Overall dimensions | 4000 × 700 × 1000 mm |
| Gross weight | 1300 kg |
| Equipment / Process | Choose It When | Main Boundary |
| Double Heads Busbar Bending Machine | The part repeatedly needs double forming at both ends and minimizing repositioning is the priority. | Dedicated end-forming machine; not the general CNC programmable bender. |
| Servo CNC Busbar Bending Machine | You need flexible bend programs, variable stop positions, flat/vertical bending and CAD/CAM-controlled production. | More flexible for varied geometry, but not dedicated to simultaneous dual-end workflow. |
It is used to press and bend both ends of a busbar, with each end capable of double bending in one forming sequence.
The listed nominal pressure is 600 kN.
The listed range is 3 × 30 to 6 × 260 mm.
No. It is a dedicated hydraulic dual-end bending press. The Servo CNC Busbar Bending Machine should be selected for flexible programmed bending.
Provide busbar material, section size, both-end bending drawing, bend angles/radii, overall part length and required cycle output.
