TRANFOVIA(NINGBO) EQUIPMENT TECHNOLOGY CO.,LTD
TRANFOVIA(NINGBO) EQUIPMENT TECHNOLOGY CO.,LTD
TRANFOVIA Static Mixing Apg Equipment is designed for production of solid-sealed terminal posts, contact boxes, insulators, transformer components and wall-penetrating bushings. The system uses static mixing so materials are mixed immediately before use, supports continuous material preparation, reduces manual intervention and records production-process parameters for traceability.
This Static Mixing APG System is intended for manufacturers producing molded electrical insulation parts such as solid-sealed terminal posts, contact boxes, insulators, transformer components and wall-penetrating bushings. It should be selected when the production route requires APG processing with continuous material preparation, static mixing, controlled feeding and pouring pressure.
The materials are mixed at the point of use so the prepared material enters the process immediately.
The system can maintain continuous material preparation to support production throughput.
A high degree of automation reduces operator intervention and labor intensity.
The equipment is designed to implement the defined process sequence consistently.
Production-process parameters are recorded for subsequent review.
| Parameter | Available / Listed Range |
| Tank volume | 100 / 150 / 200 / 300 / 500 L |
| Material preparation speed | 3000 / 4500 / 6000 / 9000 / 15000 kg/24h |
| Maximum pouring speed | 2 / 6 / 12 kg/min, depending on configuration |
| Maximum pouring pressure | About 10 bar |
| Maximum feeding pressure | About 6 bar |
| Selection Point | Static Mixing APG | Static Mixing Vacuum Casting |
| Main process identity | APG production with controlled feeding and pouring pressure | Static mixing followed by casting in a vacuum pouring box |
| Typical products | Terminal posts, contact boxes, insulators, transformer parts, wall bushings | CT/VT, transformers, reactors |
| Key parameters | Tank volume, prep speed, pouring speed, pouring / feeding pressure | Tank volume, prep speed, packing-drying capacity, pouring speed, pouring pressure, vacuum box |
| Distinctive hardware | APG pressure-delivery process | Square/round vacuum pouring box; optional rotary or two-axis servo arm |
It is used for APG production of electrical insulation products such as insulators, terminal posts, contact boxes and wall-penetrating bushings.
The listed tank volumes are 100, 150, 200, 300 and 500 L.
The technical data lists approximately 10 bar maximum pouring pressure and approximately 6 bar maximum feeding pressure.
No. Static Mixing APG Equipment is focused on the APG pressure process. The vacuum casting system instead uses a vacuum pouring box and optional pouring-arm configurations.
Provide product type, material system, daily output, required tank volume, pouring rate, pressure requirement, color-change needs and automation requirements.
