TRANFOVIA(NINGBO) EQUIPMENT TECHNOLOGY CO.,LTD
TRANFOVIA(NINGBO) EQUIPMENT TECHNOLOGY CO.,LTD
TRANFOVIA Static Mixing Vacuum Casting Equipment is designed for CT/VT, transformer, reactor and related electrical-product production. Static mixing prepares material immediately before use, while continuous material preparation, automated process control and recorded process parameters support repeatable vacuum casting production.
This Static Mixing Vacuum Casting Equipment is intended for manufacturers producing CT/VT, transformers, reactors and related electrical products that require a dedicated casting process. The equipment combines material preparation with static mixing and a vacuum pouring box; optional rotary or two-axis servo pouring arms can be selected according to the workpiece and factory layout.
Materials are mixed immediately before use so the mixed material enters the casting process without a separate long holding step.
The system can self-mix to reduce material cost.
Continuous preparation supports production throughput.
Automation reduces manual intervention and labor intensity.
The defined process sequence and recorded production parameters support repeatability and traceability.
The pouring box can be square or round, and pouring-arm options include rotary and two-axis servo configurations.
| Parameter | Listed Options / Range |
| Tank volume | 100 / 150 / 200 / 300 / 500 L |
| Material preparation speed | 3000 / 4500 / 6000 / 9000 / 15000 kg/24h |
| Packing drying tank | 300 / 600 / 900 / 1200 kg listed capacity options |
| Maximum pouring speed | 2 / 6 / 12 kg/min, depending on configuration |
| Maximum pouring pressure | About 10 bar |
| Pouring box | Square (-0.1 to 0 MPa) or round (-0.1 to 0.6 MPa), customer matched |
| Other options | Rotary pouring arm or two-axis servo pouring arm |
| Buyer Question | Vacuum Casting Equipment | Static Mixing APG Equipment |
| Main process | Casting inside a vacuum pouring box | APG production with controlled feed and pouring pressure |
| Typical products | CT/VT, transformers, reactors | Terminal posts, contact boxes, insulators, transformer parts, wall bushings |
| Key differentiator | Square/round vacuum pouring box and optional pouring arms | APG-specific pressure-process selection |
| Best choice when | The product requires resin casting inside a vacuum pouring box. | The product requires APG production with controlled feed and pressure. |
The listed applications include CT/VT, transformers, reactors and other approved electrical products.
The listed range is 100-500 L.
The technical data lists square and round pouring-box configurations, matched to customer requirements.
Optional rotary pouring arms and two-axis servo pouring arms are listed.
No. Vacuum casting is based around a vacuum pouring box, while the APG system is positioned around APG processing with controlled feeding and pouring pressure.
