Center Piece Transformer Core Cutting Line

Dedicated Cut-to-length Processing for Transformer Center-Piece Laminations.

The TRANFOVIA Center Piece Transformer Core Cutting Line is designed for transformer manufacturers that separate center-piece lamination production from other core sections. The listed models process 0.23-0.35 mm silicon steel, with cutting lengths from 150 to 2000 mm, 180 m/min feeding speed, burr ≤0.02 mm, length accuracy ±0.1 mm and cutting-angle accuracy ±0.025°.

The center limb, also called the center leg or center piece in some transformer core drawings, is the central lamination section of the magnetic core. A dedicated center-piece cutting line is useful when the factory wants this workpiece produced on a separate station with its own length range and cutting program rather than sharing all lamination work with a general line.

Why Use a Dedicated Center-Piece Line?

• Focuses production on center-limb / center-piece
• Supports the listed 150-2000 mmcutting-length range, including shorter center-limb pieces.
• Provides a listed feeding speed of 180 m/minfor both configurations.
• Provides defined burr, length-accuracy and cutting-angle targets for controlled lamination output.

Technical Specifications

Information to Confirm Before Final Configuration

• Center-piece lamination drawing and core construction.
• Silicon steel grade and thickness.
• Required lamination width and cut-length range.
• Hole, notch, angle or step requirements.
• Required collection or stacking arrangement.
• Production volume and plant electrical standard.

FAQ

1. Is center piece the same as center leg or center piece?

In this product context, these terms refer to the central lamination section of the transformer core. The exact terminology can vary between transformer drawings and equipment documentation.

2. What silicon steel thickness can the line process?

The listed thickness range is 0.23-0.35 mm.

3. What is the minimum and maximum listed cutting length?

The listed cutting-length range is 150-2000 mm.

4. What feeding speed is listed?

Both listed configurations use a feeding-speed specification of 180 m/min.

5. What burr and cutting accuracy values are listed?

The listed values are burr ≤0.02 mm, length accuracy ±0.1 mm and cutting-angle accuracy ±0.025°.

6. Why would a transformer factory use a dedicated center-piece line?

A dedicated line can be useful when center-limb laminations have a repeatable production volume, different length requirements, or a separate production flow from side and yoke laminations.

7. What information is required for quotation?

Send the center-piece lamination drawing, silicon steel thickness, required width and length, punching/notching requirements, collection method and production requirements.